Record: found
Abstract: found
Book Chapter: not found

Metallography and Microstructures of Titanium and Its Alloys

edited_book

Author(s): Luther M. Gammon , Robert D. Briggs , John M. Packard , Kurt W. Batson , Rodney Boyer , Charles W. Domby

Publication date: December 1 2004

Publisher: ASM International

Read this book at

Publisher

Buy book

Bookmark

There is no author summary for this book yet. Authors can add summaries to their books on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

This article describes the fundamentals of titanium metallographic sample preparation. Representative micrographs are presented for each class of titanium alloys, including unalloyed titanium, alpha alloys, alpha-beta alloys, and beta titanium alloys. The article provides information on the macroexamination and microexamination for these alloys. It concludes with a discussion on the several metallographic techniques developed for specific purposes, such as recrystallization studies and microstructure/fracture topography correlations.

Related collections

Most cited references 1

Record: found
Abstract: found
Book: not found

Titanium : A Technical Guide

Matthew J. Donachie (2000)

Titanium: A Technical Guide, Second Edition provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data. The book begins with an introduction and then covers selection of titanium alloys, metallurgy of titanium, ingot metallurgy and mill products, forging and forming, castings, powder metallurgy, heat treating, joining, machining, cleaning and finishing, properties, and corrosion resistance. Appendices include additional reference tables and datasheets for the most important commercial grades of titanium and titanium alloys. For information on the print version, ISBN: 978-0-87170-749-9, follow this link.